Outdoor Indoor LED Candles Waterproof Battery Operated candles with Remote timer 12-H Flickering Flameless candles set of 3(4"5"6")-Burgundy-Comenzar
$99.00
- List Price:
$99.00 - Sale Price: $99.00
- Amount Saved: $76.01
- Availability: Usually ships in 24 hours
Description
Product Description
Material:
Plastic
How to inserting the batteries
1.Open the battery compartment cover by pushing the latch back and removing the cover completely.
2.Insert 2 x AA batteries into the battery compartment according to the polarity indicators inside the compartment.
3.Close the battery compartment cover by placing the 2 small tabs in the slots and pressing down to secure the latch.
How to illuminating the Candle
Move the OFF-ON switch on the bottom to ON. The candle will illuminate until you manually move the switch to OFF.
ON-OFF button:Illuminating the Candle On=Off(Note:Before you use the Remote Control, switch the ON-OFF button to ON at the buttom of the LED candles)
TIMER:set On/Off Automatic Time feature, set to 2Hours/4Hours/6Hours/8Hours
*For example, s et 2H at 19:00, it will automatically shutdown at 21:00. Will be automatically open at 19:00 next day, at 21:00 then automatically shut down. It will cycle every 24 hours.
Mode:Candle-Non-Moving Flame;Light-Moving Flame
Brightness Control: Left button to lower the brightness Right button to increase brightness.
More tips:
Pull out the palstic sheet before use. If the flame doesn't move after yor press "light" button, press + to increase brightness to maximum. If the battery of the Remote Control runs out, you may pull out the battery tray then replace a new button cell battery.
Plastic
How to inserting the batteries
1.Open the battery compartment cover by pushing the latch back and removing the cover completely.
2.Insert 2 x AA batteries into the battery compartment according to the polarity indicators inside the compartment.
3.Close the battery compartment cover by placing the 2 small tabs in the slots and pressing down to secure the latch.
How to illuminating the Candle
Move the OFF-ON switch on the bottom to ON. The candle will illuminate until you manually move the switch to OFF.
ON-OFF button:Illuminating the Candle On=Off(Note:Before you use the Remote Control, switch the ON-OFF button to ON at the buttom of the LED candles)
TIMER:set On/Off Automatic Time feature, set to 2Hours/4Hours/6Hours/8Hours
*For example, s et 2H at 19:00, it will automatically shutdown at 21:00. Will be automatically open at 19:00 next day, at 21:00 then automatically shut down. It will cycle every 24 hours.
Mode:Candle-Non-Moving Flame;Light-Moving Flame
Brightness Control: Left button to lower the brightness Right button to increase brightness.
More tips:
Pull out the palstic sheet before use. If the flame doesn't move after yor press "light" button, press + to increase brightness to maximum. If the battery of the Remote Control runs out, you may pull out the battery tray then replace a new button cell battery.
