ThermoPro TP60S Digital Hygrometer Indoor Outdoor Thermometer Wireless Temperature and Humidity Gauge Monitor Room Thermometer with 200ft/60m Range Humidity Meter

Features:1.The bold, easy to read LCD screen displays the current indoor outdoor temperature and humidity percentages.2. With a temperature and humidity percentages trend indicator arrow and daily high and low information.3.Display stands upright for tabletop use or is wall-mountable.4. Includes all-time / 24 hours high and low records for temperature and humidity.5. You can simply reset the temperature and humidity.NOTE - Synchronize Remote Sensors1.Position the remote sensor near the base station2.Install batteries into transmitter and receiver3.The RF signal icon (located on the upper left of the base station display) will flash4.Wait for a moment or press TX button in the outdoor transmitter5.The remote sensor temperature/humidity will appearEach time the batteries (either base station or remote sensor) are replaced or base station/remote sensor lost connection, make sure to follow the synchronization process to pair and re-connect the base station and remote senorSpecifications:1. 433 Mhz transmission frequency.2. Transmission range up to 200 ft. (range maybe shorter based on interference present).3. Indoor Temperature range: -4°F~158°F (-20°C~70°C).4. Outdoor Temperature range: -58°F~158°F (-50°C~70°C).5. Humidity range: 10% ~ 99%.6. Temperature tolerance: +/- 2.0°F (+/- 1.1°C).7. Humidity tolerance: ±2% from 30% to 80%; ±3% below 30% and above 80%Thermopro TP60S digital indoor outdoor hygrometer'SizeBase station unit (Receiver):2.6"(Length) x 3.1"(Height) x 1" (Width)Remote sensor (Transmitter):2.4"(Length) x 2.5"(Height) x 0.78" (Width)Package Contents:1 x base station unit (Receiver).1 x remote sensor (Transmitter).4 x AAA size batteries (included).1 x screwdriver (included).NOTEThe remote unit should NOT be placed under the direct sunlight.Otherwise,sunlight will heat up the remote sensor which leads to higher temperature reading than the air temperature which is supposed to be measured.The remote sensor must be always placed upwards so that rain won't get inside the sensor through the vent holes on the bottom of the senor which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly.